DIY flush mount macrame light fixture

This macrame light fixture tutorial kind of happened by accident as I hinted in my last post. I wanted to make a macrame cat bed and had purchased all of the materials used in today’s post to make a cat bed. I guess you could still plop a pillow into this light fixture and hang it like the cat bed. It would look cute too.

Anyways, as I was working on today’s project I started thinking pretty early on how I suddenly wanted to use it as a flush mount light fixture instead. The staggered and structured look of it is my favorite. This also gave me the idea to turn this light fixture into a macrame chandelier which I will share in a different post yet. I just couldn’t make up my mind whether I wanted to use it as a flush mount light or a chandelier. It took me weeks to decide. Sometimes it’s just better to let something marinate in your thoughts for a while before making a move and in this case, I’m glad I did wait because I love where it ended up.

So let’s get to it…

DIY flush mount macrame light fixture

DIY flush mount macrame light fixture

Materials needed to make this macrame light fixture

The reason I bought this particular wire basket is that it doesn’t have metal loops at the top to hang the chain from. If you bought a metal basket with little loops then you have to take metal snippers and cut them off.

materials needed to make macrame light fixture

Macrame Light Fixture Instructions

Below you can see my macrame light fixture video. Click on the triangle of the image to view or if you are having trouble with that then you can also watch it on my YouTube channel. If you are watching from a phone or iPad then please hold the device sideways for better viewing:

Wrapping the top part of the hanging basket with macrame yarn

First you have to remove the moss from the wire hanging basket. Mine was simply attached with a bunch of plastic straps that you could easily snip off.

I didn’t write down the length of the piece I used to wrap the top of the basket (45 feet should be enough) because it was a long scrap piece I had. You can even use small scrap pieces of yarn, but you need to make sure that they always end and start at one of the metal sections that run down to the center, so you can later hide the ends under one of the Square Knots.  This is all better visible in my video, to be honest.

I used Vertical Lark’s Head Knots to wrap the top part and it is the same method that I used to wrap the metal hoops in my macrame cat bed tutorial as well. That tutorial has a nice slow layout of the knots with photos or you can see it in my above video as well. Make sure to do these knots nice and tight so non of the black metal shows.

looping on macrame yarn with Lark's Head Knot
beginning of second Vertical Lark's Head Knot
pulling macrame yarn behind the metal cage
second loop of Vertical Lark's Head Knot

Keep repeating these looped Vertical Lark’s Head Knots all the way around the perimeter of the metal basket structure.

finished wrapped top part of macrame light fixture

Wrapping the metal sections that run from top to bottom of the basket

For that part I used square knots again which I use in a lot of my tutorials.

I needed 220-inch pieces times 4 per metal section and my basket has 18 metal sections running from top to bottom, so I needed 72 pieces of macrame yarn at 220-inches long.

Below you can see the short beginning and end pieces of macrame strings hanging down from wrapping the top. Next is how you can hide them under the rows of square knots. You just need to make sure they remain close to the metal strand.

looping yarn to the top of the metal basket with Lark's Head knot

Fold one of those 220-inch strands in half and loop them onto the basket top with a Lark’s Head knot to the right side of a metal strand. And repeat that with another strand to the left side of the metal strand.

pulling Lark's Head knot tight

This gives you the 4 strands of macrame yarn needed for Square Knots.

view of two Lark's Head Knots on metal basket

Let me show you again how the square knot is made if you are new around here. The below light colors strands would be the one that you keep in front of the metal strand/rod going down and the dark ones are the outer two yarn strands that do the wrapping and knotting. This way you can hide the black metal well. They also hide the end yarn pieces from wrapping the top of the baskets.

view of Square Knot steps
Starting the Square Knot around the wire structure and leftover macrame yarn strands

Below you can see nicely how the short end yarn pieces will be hidden under the knots.

pulling the Square Knot tight
second part of the Square Knot around the metal structure
continuing the Square Knots all the way down the metal structure

Keep repeating the Square Knots all the way to the bottom of the metal basket. When I came to the bottom part, turned the basket around. This part can get a little bit more challenging to maneuver because the area is a little tight.You’ll get the hang of it.

Let the left over macrame yarn hang at the bottom because that is what will form the tassel at the end.

basket turned around

Below it the metal basket with all sections wrapped in square knots.

finished rows od Square Knot strands

Creating the fringed and draped sections of the macrame light fixture

I cut 6 pieces of macrame yarn at 24 inches long for the swag parts and cut a pile of 10-inch pieces of yarn from the mountains of scrap pieces that I have left from other projects. Those small pieces will create the fringe.

Remember how you start the vertical Lark’s Head Knots and Lark’s Head Knot above? This is how you will also attach the 24-inch pieces of yarn. See below…

attaching new row of yarn with Vertical Lark's Head knot

Then I skipped two of the metal strands wrapped in Square Knots and attached the yarn to the basket top with another Vertical Lark’s Head Knot. The swag section of the strand that hangs down is about 10 inches long.

attaching yarn on other side with Vertical Lark's Head Knot

Next fold the 10-inch scrap pieces in half and loop it on the the draped macrame piece with more Lark’s Head Knots.

folding 10-inch scarp piece in half
attaching 10-inch scarp pieces with Lark's Head Knots
beginning of scrap piece fringe strands

Keep repeating this to fill the entire draped strand.

finished fringe strand

I love the look of unraveled macrame yarn because it creates a contrast to the twisted standard macrame yarn texture. This is definitely just optional and if you don’t want to go through the work of opening up and combing all the yarn then just leave it. It still looks pretty. This counts for the tassel portion of the project too. That part makes the project definitely more time consuming.

unraveling and combing fringe around the macrame light fixture

Below you can see one of the draped swags with all the macrame yarn unraveled and combed before trimming it.

Repeat this all the way around the macrame light fixture with more fringe filled swags.

After this, I decided to hang the macrame light fixture from a curtain rod with some macrame yarn simply knotted to it so I could see where to trim the pieces. I cut mine to a length of 4 inches.

Next I opened the bottom strands hanging from the fixture. This part is time consuming and you can just leave it be if you’d prefer that. For this part, I find that spraying on fabric stiffener and drying that with a straightening iron until it is dry helps the strands hand nice, straight and stiff. It is a tad bit more difficult to untangle and straighten those long pieces.

Creating this macrame light fixture goes much faster if you skip the steps of unraveling the macrame yarn.

unraveling and straightening macrame light fixture tassel

I wanted to do a stacked tassel at the bottom, so I cut 22 pieces of macrame yarn at 27 inches long and tied that off at the center with a small piece of yarn as shown below.

(Check out my stacked tassel tutorial as well)

tying yarn strands in half to create tassel

After that you need to thread the tied off tassel string through the first tassel and wire basket center and either tie a fat knot or tie the string to a nail/stick so the second tassel can’t fall through the center. (see below)

knotting tassel to nail in center

You can either leave the string as is again to contrast the top fringe of the stacked tassel or open it the way I did.

unraveling second staggered tassel

Here are my measurements of what I trimmed the tassels to. Longer would also look good depending on where you want the fixture to hang.

description of tassel length

That’s it! Now all you need to do is find a spot for this pretty boho flush mount light and hang. It can cover a variety of ugly standard ceiling lights like boob lights and recessed lighting.

How to hang a flush mount macrame light fixture

Materials needed:

materials needed to hang macrame light fixture

You might be wondering what we had hanging in this spot before and I searched everywhere for a before photo but I couldn’t find one. I had a screw in pendant light converter with a glass Ikea shade which looked nice but it was hanging rather low and my husband kept banging things into the glass. I like the look and practicality now much better.

Start out by holding the macrame light fixture to the ceiling and so you can lightly trace the inner and outer circumference.

marking perimeter of macrame light fixture on ceiling

Below you can see the slight circle I drew from tracing the macrame light fixture on the ceiling. I did inside and outside perimeter because I wanted to place the screws more on the inside of the circle to avoid having the anchors and screws from showing.

view of macrame light fixture tassel on ceiling

Originally, I had considered replacing the ugly recessed light with a converter and new cheap boob light but when the macrame light fixture was up on the ceiling I noticed that you couldn’t really tell what was under all the macrame and so it didn’t really matter anymore.

I wasn’t worried about messing up the ceiling because if and when I ever replace this light, I will just use a ceiling medallion to cover the holes up. It looks nice and that way I don’t have to patch and paint the ceiling. “I love painting ceilings” said nobody ever. LOL, am I right? I definitely hate painting ceilings!

Thread the washer on to the screw and tightly twist a wire that was folded in half around the screw behind the washer the way you can see below.

screw, washer and wire contraption to hang macrame light fixture

Hammer in the plastic anchor until you reach the spiral screw section and then screw the rest in with a screw driver.

hammering anchor in ceiling

Next screw in the screw-wire-washer contraption you made earlier.

screwing in screw, washer and wire setup

I decided to use 4 screw setups like this marked on the light fixture circle as pictured below.

side view of added screws

Place the macrame light fixture against the ceiling so you can wrap the wire around the top.

placing macrame light fixture between wire

Next twist the wire tightly around the top of the macrame light fixture in all 4 screw sections and hide the wire behind the macrame lamp shade.

attaching macrame light fixture with wire by twisting it

And voila, you have a pretty boho flush mount light fixture that barely cost you anything.

Finished and hanging macrame light fixture

finished and hanging macrame light fixture

I think there is a slight victorian vibe to the macrame light that goes happily with my great-grandmother’s portrait, don’t you think so?

hallway view of flush mount macrame ceiling fixture

Sources: vinyl plank flooring | my great-grandmother’s replica painting | chairs  | hanging planter tutorial | curtains

And here is a close-up:

closeup view of finished macrame light fixture

The shadows when the light is on are pretty awesome too:

hallway view of finished macrame light fixture with lights on
lit flush mount macrame light fixture
view into living room with finished macrame light fixture
macrame light fixture tutorial using only two simple macrame knots

I hope you aren’t getting sick of all my macrame projects. There have been plenty lately. These yarn projects are just so affordable and forgiving. (Also check out how I made a top part for this fixture to turn it into a macrame chandelier)

There are other things I want to make yet this year, like giving my nightstands a makeover and possibly adding wooden beams to my bedroom ceiling. For that to happen I want it to get warmer though first so I can partially work outside.

I also hurt my leg skiing and need that to heal in order to do more physical projects. There is always something, am I right?

Tschüß,

author's signature

More of my macrame tutorials

We will be happy to hear your thoughts

Leave a reply

Decor Demo
Logo
Compare items
  • Total (0)
Compare
0
Shopping cart